Frequent usage and exposure are bound to expose your tablet screen to oil, dust, smudge, and scratches. You’ll be doing yourself & the tablet a ton of favor if you clean the tablet screen at least once in a while. If you’re wondering about cleaning tablet screen, the article will take you through the process, requirements, and dos and don’ts.
Frequent tablet cleaning will keep the screen intact for longer. It might improve the touch response as well. Regular cleaning can keep the visual experience intact. Before I start, let me take you through the list of things to avoid:
- Don’t use any harsh chemicals
- Avoid excess water contact or dampness
- Rough surfaces like napkins, paper towels are a no-go
- Refrain from using excess pressure
- Switch off your tablet before the cleaning
- Avoid sharp metal objects
As we are clear with the things to be avoided, I’ll take you through the list of necessary items that will come in handy for the cleaning process.
Contents
Requirements
- Scotch Tape
- Microfiber cloth
- Cleaning wipes or
- Tablet Screen Cleaner
How To Clean Tablet screen?
Be it oil or food particles or fingerprints or specks of dust; it’s time to get rid of them by properly cleaning your tablet screen.
Step 1: Use scotch tape as a precursor step to remove the visible particles. Cut the scotch tape into smaller pieces measuring 4-5 inches.
Stick them to the screen gently for a couple of seconds and remove them. Remember to leave sufficient room on the strip to lift them off the screen using your fingers. Repeat the process until you’ve covered the entire surface area of the screen.
Step 2: If you have a wet wipe, you can use them without the screen cleaning liquid. Take a piece and gently clean the tablet in circles. Don’t apply any excess pressure with your fingers.
Step 3: If you don’t have a wet wipe, you’ll need the liquid and a microfiber cloth. Apply/Spray the tablet screen cleaner on the center of the display and run a circular motion with the microfiber cloth. Use the cloth to remove any excess dampness or moisture. Continue the process until you have cleaned the entire screen.
Once you have cleaned the tablet screen, use the dry part of the cloth to clear any moisture. Let the tablet dry for a few minutes before switching it on.
Frequently Asked Questions
No, a hairdryer can never be used for cleaning a tablet touch screen. Any device connected to a power source can create static electricity. Bringing a hairdryer in contact or proximity to the tablet might damage the delicate components used in the chipset.
A scotch tape, a microfiber cloth, and a screen cleaner liquid or wipes are the items to use for tablet cleaning. The best way to clean a tablet screen is:
1) Apply the scotch tape on the entire screen and remove dust particles.
2) Next, spray the liquid cleaner in the center of your tablet display.
3) Now, use one end of the microfiber cloth and gently rub it on the screen.
4) Lastly, use the dry side of the microfiber cloth and clean the entire screen.
Irrespective of its softness, a dry cloth can leave smaller abrasions on your screen, causing damage. The moisture of the liquid tablet cleaner will reduce the friction and hold the dust particles to make tablet screen cleaning easier.
You can use a protective case and scratch-resistant tempered glass to protect your tablet from scratches and smudges. Liquid glass is another temporary alternative to repel liquids and protect your screen from fingerprint smudges.
Conclusion
I hope you like this article on how to clean a tablet screen. The Oleophobic coating on the screen is the primary protective layer. On regular usage, the coating wears away. Adding a tempered glass coating will be useful to protect the screen. You can also clean your tablet regularly and get the best out of it.
Featured Guides:
Leave a Reply